Ampex MiniR 700 Mini-Recorder
The Ampex MiniR 700 Mini-Recorder is designed and built to be physically and electrically compatible with the Ampex AMux 600 I/O Modules. However, it can also be configured for other data input types such as Ethernet, etc. The 14 GB, 28 GB, 56 GB, 112 GB, 224 GB or 448 GB of solid-state storage provided by the Mini-Recorder is housed in the mini-Removable Memory Module (mRMM). Recorded data may be downloaded either directly from the MiniR 700 or using a special docking station that accepts the mRMM. The Mini-Recorder Base Unit provides various interfaces such as IRIG-B Time Code channel, Ethernet, RS232 and discrete controls suitable for use with a remote cockpit control panel. I/O Modules designed for use with the IRIG 106 Chapter 10 compliant Ampex External Multiplexer (AMux600) can be used to support multiple Video, Audio, PCM, Analog, MIL-1553B and 8, 16 or 32 bit Parallel Data.

• 14, 28, 56, 112, 224 or 448 GBytes of Removable Solid-State Storage
• Extremely Compact in Size
• Rugged / Airborne Capable
• IRIG 106 Chapter 10 Recording Format with Modular Design
• Sustained Data Rates up to 600 Mb/sec
• Hot Swappable RMM
   

DSRs 400B Solid State Data Recorder
A sealed, non volatile, solid state (flash) memory cartridge enables the recorder to operate at high altitude and under severe vibration and shock conditions typically encountered in airborne applications. Hard mounting and conduction cooling makes most difficult installations possible. The removable memory modules can be played back via a PC-based network attached ground system.

• Solid State capacity up to 2.2 TB
• Low power consumption
• Data rate to 600+ Mb /s
• Compact size, small mass
• Removable flash memory modules
• IRIG B Time code Input
• RS 232/422 Control Interface
   

DSRs 400J Solid State Data Recorder
A sealed, non volatile, solid state (flash) memory cartridge enables the recorder to operate at high altitude and under severe vibration and shock conditions typically encountered in airborne applications. An interchangeable hermetically
sealed Disk memory cartridge can be used in same chassis. A standard DCRsi interface provides plug compatibility in existing DCRsi installations. Embedded 100baseT or Gigabit Ethernet interface supports direct connection to airborne & ground networks.

• Solid State capacity 2.2 TB
• Disk capacity up to 960 GB
• Data rate to 600 plus Mb /s
• Low power consumption
• Compact size
• Small mass
• Removable flash memory or disk cartridges
• Operating System: Linux/Windows

DSRs 440 Solid State / Disk Recording System
A sealed, non volatile, solid state (flash) memory cartridge enables the recorder to operate at high altitude and under severe vibration and shock conditions typically encountered in airborne applications. An interchangeable hermetically
sealed Disk memory cartridge can be used in same chassis. A standard DCRsi interface provides plug compatibility in existing DCRsi installations. Embedded 100baseT or Gigabit Ethernet interface supports direct connection to airborne & ground networks.

• Solid State capacity 2.2 TB
• Disk capacity up to 960 GB
• Data rate to 600 plus Mb /s
• Low power consumption
• Compact size
• Small mass
• Removable flash memory or disk cartridges
• Operating System: Linux/Windows

DDRs 400 Digital Data Recorder
The DDRs 400 Digital Data Recorder is designed for airborne applications requiring high data rate and storage capacity. A standard DCRsi interface provides plug compatibility in existing DCRsi installations. Capability to dub into a DIS recorder facilitates mass storage of data in automated libraries.

DSRs 410 Playback Ground Station
The Solid State or Disk Removable Memory Modules (RMMs) are inserted into the RMM Port located in the front of the DSRs 410.  The ground station is 19†rack-mountable PC-Hosted Windows Linux, network attached platform.

• PCI based
• Port for RMM Solid State / Disk
• IRIG 106 Chapter 10
• STANAG 4575 Format
• DCRsi Format
• Connectivity to DST Archival System

Ampex DSRs 420 Rackmount recorder
The DSRs 420 uses Windows or Linux operating systems and is designed for standard 19†rackmount. The Solid State or Disk Removable Memory Modules (RMMs) plug into the RMM Port located in the front of the recorder.

• 19†Rack mountable
• cPCI based
• Port for RMM Solid State / Disk
• IRIG 106 Chapter 10
• STANAG 4575 Format
• DCRsi Format
• Data rate to 600 plus Mb /s
• Connectivity to DST Archival System

Ampex Multiplexer (AMux 600) Product Line
The AMux 600 multiplexer features IRIG 106 Chapter 10 compliant packetization. It is designed for rugged and harsh airborne environments. Input channels are provided in modular forms that can be combined and configured to suit different application requirements. A Mux Adapter is needed in the DSRs 400/440 for connecting to an AMux 600. The Mux Adapter also accepts one mezzanine card. When the number of input channels is small, the multiplexer system may be reduced into an “internal†version that consists of only the Mux Adapter and one mezzanine card. The internal version may also be expanded to include the AMux 600 as the input requirement increases. The recorded data is demultiplexed via software on a Windows Linux-based platform on Ampex Model DSRs 410/420 Ground Playback Systems.

• Hardware Multiplexing
• Software DeMux on PC
• Compact size
• Rugged / Airborne
• IRIG 106 Chapter 10 Recording Format
• Modular design
• Internal & External configurations
• Aggregate Data Rate 600 Mb/s